House Painters Como | Local Painting Experts

Como is one of the Sutherland Shire’s most cherished riverside addresses. Sitting on a peninsula formed by the Georges River and Woronora River, Como’s topography creates a suburb of surprising drama — elevated streets with sweeping river views, waterfront properties with private jetties, and gully pockets of dense bush tucked between the residential blocks. The suburb’s character is set by its heritage: federation bungalows, inter-war homes with VJ lining board construction, and post-war brick and fibro dwellings give Como an architectural richness you won’t find in newer parts of the Shire.

Painting in Como requires a genuine appreciation of heritage construction. VJ (V-joint) lining boards — the tongue-and-groove vertical timber cladding found on many of Como’s older homes — need specific preparation and coating to look their best. If the boards have paint build-up from multiple previous coats, they need to be either stripped or the existing paint carefully assessed for adhesion before new paint is applied. Filling the V-grooves, caulking any gaps, priming bare timber, and applying quality exterior enamel is a multi-step process that rewards patience and experience.

The riverside setting also means Como’s exteriors face elevated humidity, leaf litter accumulation in gutters and against walls, and moisture cycling from the river mist that rolls through on cooler mornings. These conditions accelerate paint failure on south-facing and low-lying surfaces, making surface preparation and product selection even more critical than in a typical suburban environment.

Painting Services for Como Homes

• 🖌️
  Interior Painting — VJ board interiors, heritage lounge rooms, renovated open-plan spaces, and riverside bedroom retreats. We paint Como’s diverse interiors with care for period details.
• 🏡
  Exterior Painting — VJ lining board, fibro, brick, and weatherboard exterior repaints. Heritage homes get the careful preparation they deserve.
• 🏘️
  Residential Painting — full home repaints, renovation painting, and staged refreshes for Como’s owner-occupiers.
• 🏢
  Commercial Painting — business premises along Como’s main roads and the village commercial area.
• 🔑
  Pre-Sale Painting — pre-auction presentation for Como’s prestige riverside and heritage properties.
• 🧹
  End of Lease Painting — rental property repaints between tenancies.
• 🏗️
  Strata Painting — unit block painting in Como’s smaller strata developments.
• 📋
  Insurance Painting — restoration painting after storm and water damage — more common in river-adjacent Como.
• 🪵
  Deck Painting — waterfront and garden deck repaints — a standout feature of Como’s prestige homes.
• 🌿
  Timber Staining — penetrating oils and stains for Como’s abundant outdoor timber.
• ⛪
  Pergola Painting — pergola repaints for riverside entertaining areas.
• 🌳
  Fence Painting — timber, paling, and Colourbond fence painting throughout Como.
• 🔧
  Plastering — set plaster and render repairs, common in Como’s older heritage homes.
• 🛠️
  Gyprock Repairs — plasterboard patching and invisible repair painting.
• 🪟
  Window & Door Repairs — timber frame and glazing putty repairs on Como’s older homes.
• 🧪
  Mould Treatment — mould removal and anti-mould coating — essential in riverside Como’s damp pockets.
• 💧
  Water Damage Repairs — stain blocking and full restoration after water damage or flooding.
• 🎨
  Feature Wall Painting — statement walls and luxury finishes for Como’s prestige renovations.
• 💨
  Spray Painting — spray application for large surfaces and new builds.

Heritage Home Painting in Como: VJ Boards & Period Details

Como’s stock of heritage homes is among the most characterful in the Sutherland Shire. VJ lining board homes in particular deserve special mention — they’re beautiful when painted properly and look sad when the job is rushed. Here’s our approach:

Why Como Homeowners Choose Us

• ✅ Heritage timber expertise — VJ board, fibro, and weatherboard experience
• ✅ River environment knowledge — we know the specific challenges of Como’s humid, leafy setting
• ✅ 30+ years in the Shire — trusted by Shire families for decades
• ✅ Licence #257400C — fully licensed and insured
• ✅ Family business — same team, consistent quality
• ✅ Free colour consulting — included with every quote

Como FAQs

Nearby Suburbs

• Jannali — character homes and pre-sale painting
• Sylvania — family suburb, deck and residential painting
• Kirrawee — residential and new development painting
• Bangor — family suburb, renovation painting

Why Choose House Painting Sutherland Shire?

We are a family owned and operated painting business that has served the Sutherland Shire for over 30 years. That long-term local presence translates into real, practical advantages for every customer we work with. Here is what sets us apart.

We are genuinely local. Our base is in Caringbah, which puts us within 20 minutes of every suburb in the Shire. We do not have long travel times baked into our pricing, we show up when we say we will, and we are always easy to reach when you need us. You deal with the same team from quote to completion — not a franchise or agency sending whoever happens to be available.

Thirty years of Shire experience. We have painted every housing type in the district: 1940s fibro shacks, 1960s clinker brick bungalows, 1970s and 1980s brick veneer homes, modern rendered double-storeys, new-build apartments, commercial warehouses, and heritage riverside cottages. We know which products work on which surfaces in the Shire’s specific coastal and bushland climate, and we have the experience to give you honest advice about what your project actually needs.

Licensed and fully insured. Painters Licence #257400C is required by law for painting work over a certain value in NSW, and not every painter carries it. We do. We also carry full public liability insurance on every single job — which means if something goes wrong, you are protected. We use premium Australian paint brands — Dulux, Taubmans, and Haymes — applied to properly prepared surfaces.

We take preparation seriously. Surface preparation is where the quality of a paint job is actually determined. A paint job on a poorly prepared surface will show problems within two or three years regardless of how good the topcoat is. We wash, treat, repair, prime, and mask every surface properly before any paint goes on. We take as long as the preparation requires — we do not rush it to save time and we do not skip steps to reduce cost.

Free colour consulting included. We bring sample boards to every quote visit and can spend time helping you work through your colour options at no extra charge. We assess how different colours will look in your home’s specific light conditions, advise on what works for your property type, and help you make a confident decision before work starts. This service is included with every quote.

Leave no trace cleanup. When we finish a job, we remove all drop sheets, masking tape, and plastic sheeting, check all surfaces near the work area for any overspray or drips, and take all excess paint and materials with us. Your home looks exactly as it did before we arrived — except the painting is done and looks great.

Our Painting Process: Step by Step

Understanding what a professional painting project looks like helps you plan effectively and recognise quality work at each stage. Here is our standard process.

Free quote visit. We visit the property at a time that suits you, walk through all surfaces to be painted, assess the condition of existing coatings and identify any repairs or preparation required, and discuss your colour preferences and timeline. The quote visit is completely free and carries no obligation. We take detailed notes and measurements during the visit so our written quote is accurate and complete.

Written quote. We provide a detailed written quote itemising exactly what is included — which surfaces, how many coats, what products, what preparation and repair work, and the fixed total cost. You know exactly what you are getting and exactly what it costs. We do not add unexpected items to the invoice after the job is done.

Colour finalisation. If you have not yet decided on your colours, we bring sample boards and help you finalise the selection before work starts. For larger projects we can apply colour test patches on the actual wall so you can see how the colour looks in your specific light conditions before we commit to the full job.

Surface preparation. Depending on the surface, preparation includes high-pressure washing, biological treatment for lichen and mould, sanding, scraping of loose existing paint, crack filling, caulking of gaps and joints, applying masonry sealer or primer, and masking adjacent surfaces. We take this stage seriously — it is not rushed and it is not abbreviated.

Paint application. We apply the number of coats specified in the quote — always a minimum of two on every surface, more where the coverage requires it. Walls and ceilings are cut in carefully by brush and rolled out evenly. Trims and joinery are brush-applied for precision. We check coverage and consistency at each stage. We allow correct dry time between coats — never applying a wet coat over an uncured previous coat.

Cleanup and handover. All drop sheets, masking tape, and plastic are removed. Floors, furniture, and surfaces near the work area are checked and cleaned. We do a final walkthrough with you to confirm everything is to your satisfaction. Payment is due on completion and we accept EFT.

Painting VJ Lining Board Homes in Como

Como’s VJ lining board homes are among the most characterful properties in the Sutherland Shire. VJ board — tongue-and-groove vertical timber cladding with a chamfered V-groove at each joint — was widely used in Australian homes from the late Victorian era through the 1950s and gives Como’s older properties their distinctive period character. Painting these homes correctly requires specific knowledge and care.

The preparation sequence for VJ board exterior painting is more involved than for a standard brick or rendered home. We begin by assessing all boards for splits, soft sections, and any boards that have moved out of alignment. Soft or deteriorated sections are replaced before painting — painting over deteriorating timber is not a solution. We then wash the entire surface and treat for any biological growth, particularly on south-facing and river-adjacent aspects where moisture promotes lichen and mould.

The V-grooves between boards are the critical point. Over decades, the timber behind the V-groove has typically accumulated paint build-up, gaps have opened as the timber has moved seasonally, and old caulking has dried and fallen away. We apply fresh flexible paintable caulk in all V-groove gaps, working it in carefully and smoothing to a consistent depth. This caulking is what prevents moisture from entering the wall cavity through the joints — without it, water runs in behind the boards and causes the painting to fail from within.

Prime coat goes on all bare timber and all repaired sections before the final colour coats. We use oil-based primer on bare hardwood because it penetrates the grain more deeply than water-based primer and provides better adhesion for the topcoat on dense hardwood species. Two full coats of quality exterior enamel in the chosen colour complete the job. The result, on a well-prepared VJ board home in Como, is spectacular — the period character of the home is enhanced, not obscured, by a quality paint job.